Details
This is a rotational molded swing made of polypropylene and has a newly improved a-bracket. This is an extremely durable seat, available in bright colors that will not fade. These swing seats are made wider and sturdier to hold both small and large children. Meets ASTM standards and can be used commercially or for residential use.
Features
- Swing seat measures 20"L x 8-9"W x 2"T
- Space between a-brackets is 16"
- Available in Red, Blue, Green, Yellow, and Black
- Tensile strength tested to 5000 lbs
- Made in the USA
Installation Instructions
Attach metal triangle brackets by first putting one of supplied washers on both ends of each hanger. Then, push brackets through holes in the end of each seat. You may have to hit brackets with a rubber mallet to insert them through the holes in the plastic. Once brackets are through the holes, slide another washer on threaded portion of bracket sticking through the bottom of the swing. Attach and tighten nyloc nut so that it is secure and not more than two threads are protruding past the nut. Repeat this process for all four ends of brackets.
